Navigation Panel - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

• B - navigation panel
• C - main window
• D - status bar

3.2.1 Navigation Panel

Use the menu items on the navigation panel to open screens to configure ZyXEL
Device features. The following tables describe each menu item.
Table 2 Navigation Panel Summary
LINK TAB
Status
Network
WAN Internet
Connection
More
Connections
LAN IP
Client List
IP Alias
Wireless LAN General
WPS
WPS Station
MAC Filter
Advanced
Setup
NAT Port
Forwarding
DMZ Host
Security
IP Filter Incoming
Advanced
Static Route IP Static Route Use this screen to configure IP static routes to tell your device
P-870HW-51a v2 User's Guide
FUNCTION
This screen shows the ZyXEL Device's general device and network
status information. Use this screen to access the statistics and
client list.
Use this screen to configure ISP parameters, WAN IP address
assignment, DNS servers and other advanced properties.
Use this screen to configure additional WAN connections.
Use this screen to configure LAN TCP/IP DHCP settings.
Use this screen to view current DHCP client information and to
always assign specific IP addresses to individual MAC addresses
(and host names).
Use this screen to partition your LAN interface into subnets.
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Use this screen to enable WPS (Wi-Fi Protected Setup) and view
the WPS status.
Use this screen to use WPS to set up your wireless network.
Use this screen to configure the ZyXEL Device to give exclusive
access to specific wireless clients or exclude specific wireless
clients from accessing the ZyXEL Device.
Use this screen to configure the advanced wireless LAN settings.
Use this screen to make your local servers visible to the outside
world.
Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
This screen shows a summary of the IP filtering rules, and allows
you to add or remove an incoming IP filtering rule that allows
incoming traffic from the WAN.
about networks beyond the directly connected remote nodes.
Chapter 3 Introducing the Web Configurator
37