ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual page 119

The following table describes the labels in this screen.
Table 33 Incoming IP Filtering
LABEL
Active
Filter Name
Interfaces
Protocol
Source Address
/ Mask
Source Port
Dest. Address /
Mask
Dest. Port
Remove
Add
Apply
Remove
P-870HW-51a v2 User's Guide
DESCRIPTION
Select this check box to enable the rule.
This displays the name of the rule.
This displays the WAN interface to which this rule is applied.
This displays the IP protocol that defines the service to which this rule
applies.
This displays the source IP addresses and subnet mask to which this
rule applies. Please note that a blank source address is equivalent to
Any.
This is the source port number.
This displays the destination IP addresses and subnet mask to which
this rule applies. Please note that a blank destination address is
equivalent to Any.
This is the destination port number.
Select the rule(s) you want to delete in the Remove column and then
click the Remove button.
Click Add to create a new rule.
Click Apply to save your changes back to the ZyXEL Device.
Click Remove to delete the selected rule(s).
Chapter 9 IP Filter
119