The Port Forwarding Edit Screen - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

Chapter 8 Network Address Translation (NAT)
Table 28 NAT Port Forwarding (continued)
LABEL
Internal Port
End
Server IP
Address
Modify
Apply
Cancel

8.3.1 The Port Forwarding Edit Screen

This screen lets you create or edit a port forwarding rule. Select User Define in
the Service Name field or click the rule's edit icon in the Port Forwarding
screen to open the following screen.
Figure 55 Port Forwarding Edit
The following table describes the labels in this screen.
Table 29 Port Forwarding Edit
LABEL
Active
Service Name
WAN Interface
110
DESCRIPTION
This is the last internal port number that identifies a service.
This field displays the destination IP address for the packet.
Click the edit icon to go to the screen where you can edit the port
forwarding rule.
Click the remove icon to delete an existing port forwarding rule. Note
that subsequent rules move up by one when you take this action.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to return to the previous configuration.
DESCRIPTION
Clear the check box to disable the rule. Select the check box to enable it.
Enter a name to identify this rule. This field is read-only if you click the
edit icon in the Port Forwarding screen.
Select a WAN interface for which you want to configure port forwarding
rules.
P-870HW-51a v2 User's Guide