The Dynamic Dns Screen - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

802.11bg wireless vdsl2 4 port gateway
Hide thumbs Also See for ZyXEL Prestige P-870HW-51a v2:
Table of Contents

Advertisement

Chapter 12 Dynamic DNS Setup

12.3 The Dynamic DNS Screen

To change your ZyXEL Device's DDNS, click Advanced > Dynamic DNS. The
screen appears as shown.
Figure 68 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 43 Advanced > Dynamic DNS
LABEL
Service
Provider
Host Name
Interface
User Name
Password
Email
Key
Apply
Cancel
142
DESCRIPTION
Select the name of your Dynamic DNS service provider.
Type the domain name assigned to your ZyXEL Device by your Dynamic
DNS provider.
You can specify up to two host names in the field separated by a comma
(",").
Select the WAN interface to use for updating the IP address of the
domain name.
Type your user name.
Type the password assigned to you.
If you select TZO in the Service Provider field, enter the user name
you used to register for this service.
If you select TZO in the Service Provider field, enter the password you
used to register for this service.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
P-870HW-51a v2 User's Guide

Advertisement

Table of Contents
loading

Table of Contents