ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual page 144

Chapter 13 Remote Management
Click Advanced > Remote MGMT to open the following screen. Use this screen
to configure your P-870HA to be managed by an ACS.
Figure 69 TR-069
The following table describes the fields in this screen.
Table 44 TR-069
LABEL
Inform
Inform Interval
ACS URL
ACS User Name
ACS Password
WAN Interface
used by TR-069
client
Connection
Request
Authentication
Connection
Request User
Name
144
DESCRIPTION
Select Enable to activate remote management via TR-069 on the
WAN. Otherwise, select Disable.
Enter the time interval (in seconds) at which the ZyXEL Device sends
information to the auto-configuration server.
Enter the URL or IP address of the auto-configuration server.
Enter the TR-069 user name for authentication with the auto-
configuration server.
Enter the TR-069 password for authentication with the auto-
configuration server.
Select a WAN interface through which the TR-069 traffic passes.
Select this option to enable authentication when there is a connection
request from the ACS.
Enter the connection request user name.
When the ACS makes a connection request to the ZyXEL Device, this
user name is used to authenticate the ACS.
P-870HW-51a v2 User's Guide