ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual page 58

Chapter 5 WAN Setup
When you use the WAN > Internet Connection screen to set up Internet
access, you are configuring the first WAN connection.
Figure 29 WAN > More Connections
The following table describes the labels in this screen.
Table 11 WAN > More Connections
LABEL
#
Name
Interface
VLAN ID/
Priority
Encapsulation
Modify
Add
58
DESCRIPTION
This is an index number indicating the number of the corresponding
connection.
This is the name you gave to the Internet connection.
This shows the name of the ZyXEL Device's interface used by this
connection.
ptm0 indicates the WAN using ENET ENCAP or in bridge mode.
ppp0 indicates the WAN interface using PPPoE.
The last number represents the index number of connections over the
same PVC or the VLAN ID number assigned to traffic sent through this
connection.
This field shows the VLAN ID number and priority configured for this
WAN connection when VLAN multiplexing is enabled. Otherwise, it shows
disable.
This field indicates the encapsulation method of the Internet connection.
The first (ISP) connection is read-only in this screen. Use the WAN >
Internet Connection screen to edit it.
Click the edit icon to edit the Internet connection settings. Click this icon
on an empty configuration to add a new Internet access setup.
Click the remove icon to delete the Internet access setup from your
connection list.
Click this to add a new connection.
P-870HW-51a v2 User's Guide