ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual page 92

Chapter 7 Wireless LAN
address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the
MAC addresses of the devices to configure this screen.
Use this screen to change your ZyXEL Device's MAC filter settings.Click Network
> Wireless LAN > MAC Filter. The following screen displays.
Figure 46 Wireless LAN > MAC Filter
The following table describes the labels in this screen.
Table 24 Wireless LAN > MAC Filter
LABEL
Active MAC
Filter
MAC Restrict
Mode
MAC
Address
Add Entries
Set
MAC
Address
Remove
Apply
Remove
92
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the table below.
Select Allow to permit access to the ZyXEL Device, MAC addresses not
listed will be denied access to the ZyXEL Device.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed
will be allowed to access the ZyXEL Device
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
Click this to save and insert the entry to the table below.
This is the index number of the MAC address.
This is the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device.
Select the entry(ies) that you want to delete in the Remove column, then
click the Remove button.
Click this to save your changes back to the ZyXEL Device.
Click this to delete the selected entry(ies).
P-870HW-51a v2 User's Guide