To change your ZyXEL Device's log settings, click Maintenance > Logs > Log
Settings. The screen appears as shown.
Figure 91 Maintenance > Logs > Log Settings
The following table describes the fields in this screen.
Table 52 Maintenance > Logs > Log Settings
LABEL
Active
Syslog Server
IP Address
Log Severity
Apply
Cancel
P-870HW-51a v2 User's Guide
DESCRIPTION
Select to enable or disable system logging.
Enter the server name or the IP address of the log server. The logs will be
stored in both the ZyXEL Device and the log server.
Otherwise, enter 0.0.0.0 to store the logs in the local memory of the
ZyXEL Device only.
Select the severity level of the logs that you want the ZyXEL Device to
record and send to the log server.
The ZyXEL Device records the logs with the severity level equal to or
higher than what you selected.
The order of the log severity (from the highest to the lowest) is
Emergency > Alert > Critical > Error > Warning > Notice > Informational
> Debugging.
Click Apply to save your customized settings.
Click Cancel to return to the previously saved settings.
Chapter 16 Logs
171