ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual page 90

Chapter 7 Wireless LAN
Click Network > Wireless LAN >WPS. The following screen displays.
Figure 44 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 22 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Generate
WPS Status
Release_Co
nfiguration
Apply
Refresh
90
DESCRIPTION
Select the check box to activate WPS on the ZyXEL Device.
This shows the PIN (Personal Identification Number) of the ZyXEL
Device. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click this button to have the ZyXEL Device create a new PIN.
This displays Configured when the ZyXEL Device has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the ZyXEL Device or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
Click Apply to save your changes back to the ZyXEL Device.
Click Refresh to reload the previous configuration for this screen.
P-870HW-51a v2 User's Guide