Static Route; Chapter 10 Static Route; Overview; What You Can Do In This Chapter - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

C
H A P T E R

10.1 Overview

The ZyXEL Device usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the ZyXEL Device send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL
Device's LAN interface. The ZyXEL Device routes most traffic from A to the
Internet through the ZyXEL Device's default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 60 Example of Static Routing Topology
A
R3

10.1.1 What You Can Do in this Chapter

The Static Route screens let you view and configure IP static routes on the ZyXEL
Device (Section 10.2 on page
P-870HW-51a v2 User's Guide
LAN
WAN
126).
10

Static Route

R1
Internet
R2
125