Pu Contrast Adjustment; Extended Direct Setting - Mitsubishi Electric 800 Series Instruction Manual

(E) Environment setting parameters
5.7.5

PU contrast adjustment

Contrast adjustment of the LCD of the LCD operation panel (FR-LU08) and the parameter unit (FR-PU07) can be
performed.
Decreasing the setting value lowers the contrast.
Pr.
991
PU contrast adjustment
E105
The above parameter is displayed as a simple mode parameter only when the LCD operation panel (FR-LU08) and the parameter unit (FR-
PU07) is connected.
5.7.6

Extended direct setting

The PID action set point setting screen can be displayed quickly on the monitor.
Pr.
1000
Direct setting selection
E108
• The monitor display can be switched from the Main monitor screen to the set point setting screen for the PID action by
simply operation, according to the setting of Pr.1000 Direct setting selection. On each setting screen, turn
input a setting value, and press
Example of screen switching and shifting when the PID control is enabled (Pr.128 ≠ "0")
Output frequency
1 2 : 3 4
0.00
Hz
STOP PU
PREV SET NEXT
One of the Main monitor screen
∗1

When Pr.1000="0"

When Pr.1000="1"

When Pr.1000="2"

Not displayed when PID control is disabled (Pr.128="0").

Indication of [NEXT] is not displayed when Pr.1000="0".
• To switch back the monitor display from the Extended direct screen or the Frequency setting screen to the Main monitor
screen, press .
(BACK)
NOTE
• For the availability of the extended direct setting for your operation panel, refer to your FR-LU08 Instruction Manual.
Parameters referred to ???????
Pr.128 PID action selection
248
PARAMETERS
Name Initial value
58
Name Initial value
0
to confirm the setting.
(SET)
∗2,∗3
PID act set pnt
Pres value 10.0PSI
Set value 10.0PSI
STOP
BACK SET N E X T
Extended direct #1 screen ∗4
page 488
Setting range
0 to 63
Setting range
0
1
2
∗2,∗3
2ndPID set point
Pres value
(NEXT) Set value
PU STOP
NEXT BACK SET
Extended direct #2 screen ∗4
Description
0: Low  63: High
Description
Displays the Frequency setting screen.
Displays the Extended direct (set point
setting) screen.
Displays the Extended direct (set point
setting) screen and the Frequency setting
screen.
∗3
Frequency Setting
10.0PSI Pres value
10.0PSI (NEXT) Set value
PU
N E X T NEXT BACK
Frequency setting screen ∗5
∗2
(NEXT)
(NEXT)
to
0.00Hz
100.00Hz
STOP PU
SET N E X T NEXT
∗3