Mitsubishi Electric 800 Series Instruction Manual page 257

(E) Environment setting parameters
Automatic parameter setting (Pr.999)
• Select which parameters to automatically set from the table below, and set them in Pr.999. Multiple parameter settings are
changed automatically. Refer to
Pr.999
Setting
1 Sets the standard monitor indicator setting of PID control.
2 Automatically sets the monitor indicator for PID control.
Automatically sets the communication parameters for the GOT connection with a PU
10
connector ("Controller Type" in GOT: FREQROL 500/700/800, SENSORLESS SERVO)
Automatically sets the communication parameters for the GOT connection with RS-485
11
terminals ("Controller Type" in GOT: FREQROL 500/700/800, SENSORLESS SERVO)
Automatically sets the communication parameters for the GOT connection with a PU
12
connector ("Controller Type" in GOT: FREQROL 800 (Automatic Negotiation))
Automatically sets the communication parameters for the GOT connection with RS-485
13
terminals ("Controller Type" in GOT: FREQROL 800 (Automatic Negotiation))
20 50 Hz rated frequency
21 60 Hz rated frequency
NOTE
• If the automatic setting is performed with Pr.999 or the automatic parameter setting mode, the settings including the changed
parameter settings (changed from the initial setting) will be automatically changed. Before performing the automatic setting,
confirm that changing the parameters will not cause any problem.
PID monitor indicator setting (Pr.999 = "1 or 2")
Pr.
759 PID unit selection
1142 Second PID unit selection
774 Operation panel monitor selection 1
775 Operation panel monitor selection 2
776 Operation panel monitor selection 3
934 PID display bias coefficient
935 PID display gain coefficient
1136 Second PID display bias coefficient
1138 Second PID display gain coefficient
— 3-step monitor setting
— Direct setting
— Dedicated parameter list function

Enabled when the FR-PU07-01 is used.
256
PARAMETERS
page 257 for the list of parameters that are changed automatically.
Description
Sets the related parameters of the rated frequency according to
the power supply frequency
Name Initial value
9999
9999
9999
9999
9999
9999
9999
9999
9999
—
—
—
Pr.999="1" Pr.999="2"
9999 4
9999 4
9999 52
9999 53
9999 54
9999 0
9999 100
9999 0
9999 100
Disabled Enabled

Disabled Enabled

Disabled Enabled

Refer to page
501
347
501
—
—
—