Juniper MX2020 Quick Start Manual page 31

Copyright © 2015, Juniper Networks, Inc.
To install the router transport kit:
Remove the router transport kit from the shipping crate (see
1.
Transport Kit" on page
NOTE: The router transport kit weighs approximately 138.5 lb (62.82 kg).
Remove the winch strap plate that is secured to the winch mount by using a
2.
9/16-in. (14 mm) socket wrench, and set the plate aside.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the winch
3.
mount to the router transport kit, and set the mount aside.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router
4.
transport mounting plate and wheel assembly (left and right) to the router transport
platform, and set them aside (see
Figure 20: Preparing the Router Transport Kit for Installation
Remove the four shipping brackets that secure the router to the shipping crate platform
5.
by using a 9/16-in. (14 mm) socket wrench, and a number 2 Phillips screwdriver, and
set the brackets aside.
Align the left router transport mounting plate and wheel assembly (indicated by left
6.
arrow) with the holes on the left side of the chassis (see
Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router
7.
transport mounting plate and wheel assembly to the chassis.
Install the Router Transport Kit onto the Router
28).
Figure 20 on page
"Unpack the Router
31).
Figure 21 on page 32).
31