Use The Transport Kit To Install The Router In The Rack - Juniper MX2020 Quick Start Manual

MX2020 3D Universal Edge Router Quick Start
32
Align the right router transport mounting plate and wheel assembly (indicated by right
8.
arrow) with the holes on the right side of the chassis (see
Using a number 3 Phillips screwdriver, tighten the captive screws to secure the router
9.
transport mounting plate and wheel assembly to the chassis.
Figure 21: Installing the Router Transport Kit onto the MX2020 Router
MX
22 00
LC
CB- 10 9 10
RE PSM 11 12
0 13 14
LC SFB 11 15 16 17
0 1 2
0 0 3 4
12 5 6
7 8
1
1 13
2
2 14 MAST ER RE 0
ONLIN RE 1
3 OFFLI NE E
3 15
4 4 16
5 5 17
6 6
18
7 7 SFB LC
19
8 CB- 1 RE
9 LC

Use the Transport Kit to Install the Router in the Rack

Because of the router's size and weight—up to 1515 lb (687.2 kg) depending on the
configuration—you must use a router transport kit to install the router.
NOTE: We recommend that you purchase the router transport kit from Juniper
Networks.
NOTE: Four persons are needed to install the router into a rack.
CAUTION: Before front-mounting the router in a rack, have a qualified
technician verify that the rack is strong enough to support the router's weight
and is adequately supported at the installation site.
Figure 21 on page 32).
Copyright © 2015, Juniper Networks, Inc.