York Sun Premier GZA1M Series Start-Up & Operation page 102

5587001-YSG-A-520 | Start-Up & Operation Guide
Table 32: BACnet Points List (Continued)
BACnet
Object
Attributes Type
MATClgLim AV
Econ-MinPos AV
MAT AV
DAH AV
RA-Enth AV
RAT AV
DVentMaxEconPos AV
DVentIAQ-Sp AV
DVentDiff-Sp AV
ExFanVFD AV
ExF-RunTim AV
Bldg-Sp AV
BldgPres AV
EAD-O AV
ExDmpPosFanOn AV
ExDmpPosFanOff AV
HGR AV
Dehum-SP AV
102
Object Read/
Short Description
ID Write
29755 R/W MATClgLim
29759 R/W Econ-MinPos
29760 R MAT
29762 R DAH
29763 R RA-Enth
29764 R RAT
29766 R/W DVentMaxEconPos
29767 R/W DVentIAQ-Sp
29768 R/W DVentDiff-Sp
29776 R EF-O
29779 R ExF-RunTim
29780 R/W Bldg-Sp
29781 R BldgPres
29782 R EAD-O
29783 R/W ExDmpPosFanOn
29784 R/W ExDmpPosFanOff
29790 R HGR
29792 R/W Dehum-SP
Long
Point Definitions (Units)
Description
Mixed Air A BAS command to limit outside air
Temperature damper to prevent MAT below this
Cooling Limit value (0.0–100.0°F)
Economizer
A BAS command to adjust minimum
Minimum Position
outside air damper position (0–100 %)
Setpoint
Mixed Air
Displays the active MAT (°F)
Temperature
Discharge Air Displays the active discharge air
Humidity humidity (%RH)
Return Air Displays the active return air
Enthalpy enthalpy (BTU/lb)
Return Air
Displays the active RAT (°F)
Temperature
Demand
Ventilation A BAS command to adjust maximum
Maximum demand ventilation economizer
Economizer position (%)
Position
Demand A BAS command to adjust IAQ (CO
Ventilation IAQ demand ventilation setpoint (0–5,000
Setpoint PPM)
Demand
A BAS command to adjust demand
Ventilation
ventilation (CO
Differential
(0–5,000 PPM)
Setpoint
Exhaust Fan VFD Displays the status of exhaust/return
% Command fan VFD command (%)
Exhaust Fan
Displays the exhaust/return fan
Accumulated
runtime (hours)
Runtime
Building Pressure A BAS command to adjust building
Setpoint pressure setpoint (-0.25 to 0.25 iwg)
Building Static Displays active building static
Pressure pressure (iwg)
Exhaust Damper Displays the status of exhaust
% Command damper command (%)
Exhaust Damper
A BAS command to enable exhaust
Position for
fan based on exhaust damper
Exhaust Fan to
position (20–99%)
Turn ON
Exhaust Damper
A BAS command to disable exhaust
Position for
fan based on exhaust damper
Exhaust Fan to
position (20–99%)
Turn OFF
The commanded HGRH valve
HGRH Command
position (%)
Dehumidification A BAS command to adjust
Setpoint dehumidification setpoint (0–100 %RH)
)
2
) differential setpoint
2
YORK