Table of Contents
Advertisement
Checking Class of Service Numbers
Checking Subscriber Extensions
June 2002
To check the class of service numbers:
1. At the INTUITY Main Menu, select:
AUDIX Administration
The system displays the AUDIX Command Prompt screen.
2. Enter di cos cos-number where cos-number is a class of service
number.
The system displays Class of Service Screen, page 1.
3. Verify that all of the data on the screen is correct.
4. Press F7 (Nextpage).
5. The system display the Class of Service Screen, page 2.
6. Check that all of the data on the screen is correct. If the data on
either screen is incorrect, you may need to rerun the data transfer.
7. Return to Step 2 to verify another class of service number.
8. Press F1 (Cancel) to return to the command line.
To check the subscriber extensions:
1. Enter di su extension where extension is the subscriber
extension.
The system displays the first Subscriber screen.
2. Verify that all of the data on the screen is correct.
3. Press F7 (Nextpage).
The system displays the second screen, Subscriber
Class-of-Service Parameters.
4. Verify that all of the data on the screen is correct. If the data on
either screen is incorrect, you may want to add the data manually
or you may need to rerun the data transfer.
5. Return to Step 1 until you have checked four other subscribers.
6. Press F1 (Cancel) to return to the command line.
585-313-118 Issue 4
Migrating from DEFINITY AUDIX
25
Advertisement
Table of Contents
