Reducing/Enlarging Using The Original And Copy Sizes - Canon iR3245 Manual

Reducing/Enlarging Using the Original and Copy Sizes

The Zoom Program mode enables you to reduce or enlarge originals by individually entering the
dimensions of the original and copy paper (record size).
The available copy ratios are from 25% to 400% when the original is placed on the platen glass, and
from 25% to 200% when the original is placed in the feeder.
The following two Zoom Program modes are available.
Remark
The specified sizes are converted into a copy (zoom)
ratio (%) by the machine using the formula below. The
result is rounded to the closest integer.
Copy (zoom) ratio (%) = (copy (record) size/original
size) × 100
To cancel this setting, press [Copy Ratio] → [Zoom
Program] → [Cancel].
Making Copies (Scanning) with the Same XY Copy/Zoom Ratio (Zoom)
You can set the same copy (zoom) ratio for both the horizontal (X) and vertical (Y) axes.
For instructions on entering values in inches, see the
Reference Guide.
Reducing/Enlarging Using the Original and Copy Sizes
3
3-17