Margin Mode
This mode enables you to make prints with the entire original image shifted by a designated width to
the left, right, top, or bottom in order to create a margin on the prints. Use this mode to make prints
ready for placement in ring binders.
Remark
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-8)."
The Margin mode shifts the entire original image by the
designated width. Therefore, an original whose image
extends all the way to the edges of the sheet may be
partially cut off on the print.
1. Select the desired User Inbox number and the document to print →
press [Print] → [Change Pr. Settings] → [Special Features] → [Margin].
You can choose to only create a margin on the back
side of a print. Therefore, originals that already have a
margin can be printed in the 1
1-Sided mode.
2-Sided mode or 2
Margin Mode 4-129
4