Settings for Receiving Documents in Memory
You can use the Memory Lock mode outside of the preset Memory Lock start and end times.
Remark
If you want to use Memory Lock, you must first set Use
Fax Memory Lock and Use I-Fax Memory Lock to 'On'
in Memory RX Inbox Settings. To access the Memory
RX Inbox Settings screen, press
Settings] → [Communications Settings]. (See the
Sending and Facsimile Guide.)
1. Press [Memory RX Inbox] on the Inbox Selection screen → press
[Memory RX Inbox].
2. Select [On] or [Off] for I-Fax Memory Lock and/or Fax Memory Lock.
Details of each item are shown below.
[On]:
→ [System
Documents are received and
Settings for Receiving Documents in Memory
6
6-5