Canon iR3245 Manual page 264

If you try to set a different paper size for one feature, the paper sizes for the other features are
automatically changed to the new paper size. However, if you are only changing the paper source with the
same paper size, the settings for the other features will not change.
4. Press [Next].
If only [Chapter Page] was selected, proceed to step 6.
4
5. Select whether to copy on the front cover, back cover, or sheet insertion
→ press [Next].
If [Sheet Insertion] or [Chapter Page] is not selected, press [OK].
A chapter page is always copied on one side.
If you select [Leave Blank] for the front and/or back cover and/or sheet insertion, the machine inserts a
sheet of paper from the paper source that you selected in step 3 to be used as the copy's front and/or back
cover. You can also select the paper source for the sheet insertion in step 7.
If you select [Print on Front Side], [Print on Back Side], or [Copy on Both Sides] for the front and/or back
cover and/or sheet insertion, the machine inserts a sheet of paper from the paper source that you selected
in step 3, and prints your original on its front side, back side, or on both sides. This will then be used as the
copy's front cover. You can also select the paper source for the sheet insertion in step 7.
6. Press [Add].
7. Specify where the sheet insertions or chapter pages should be added
using
If you are inserting the sheet insertions, you can change the paper source and side(s) to be
printed on.
If you are inserting the chapter pages, you can change the paper sources.
Repeat steps 6 and 7, as necessary.
You cannot insert a sheet insertion or chapter page on the first page. Set their positions starting from the
second page.
4-10 Cover/Sheet Insertion
If you are using paper that already has printing on it (e.g., company logo) as your front and/or back
cover and/or sheet insertion, then you must select [Leave Blank]. Otherwise, the machine will copy
your original's first or last page on the preprinted paper.
→ press [OK].
-