If you selected the paper to use for the main document from [Stack Bypass Settings], select
the paper size and press [Next] → select the paper type and press [OK].
If you pressed [Add cover], press [Next] → select the paper source to use for the cover
page.
3
If you selected the paper to use for the cover from [Stack Bypass Settings], select the paper
type → press [OK].
Press [Next] → select whether to print on the cover → press [OK].
Make sure to use the same paper size for the cover and the main document.
If you select [No] for <Select whether to print on covers.>, [Heavy] can be selected.
Only 64 to 90 g/m
cover page.
If you are setting the paper for the cover page in the paper drawer, you must load the paper face up.
If you are setting the paper for the cover page in the stack bypass, you must load the paper face down.
3. Press
3-44
Page Order (Staple)
2
paper can be used for the main document, and 64 to 128 g/m
.
2
paper can be used for the