Canon iR3245 Manual page 31

Press [Cascade Copy] → select whether to perform error recovery.
Details of each item are shown below.
[On]:
[Off]:
Error Recovery is performed only if the Finishing mode is set.
You must choose a remote copy printer that supports the selected copy settings. The printers that do not
support the chosen settings are shown, but are grayed out. Also, even if the remote copy printer supports
the Copy mode, if you select settings other than Collate and Group, you can select only a remote copy
printer equipped with the same finisher as this machine.
If Error Recovery for the Cascade Copy mode is set to 'On', the remaining copy job is not processed in the
following cases:
The machine is scanning originals for the Cascade Copy mode.
The Cascade Copy mode is used in combination with the Cover/Sheet Insertion or Copy Set
Numbering mode.
The Cascade Copy mode is used in combination with all three of the Different Size Originals, Auto
Paper Selection, and 2-sided modes.
The printer which is operating normally has completed the cascade copy job.
If an error occurs in either this
machine or the remote copy
printer, the remaining copy
jobs are assigned to the
machine which is operating
normally.
If an error occurs in either this
machine or the remote copy
printer, the remaining copy
jobs are not assigned to the
machine which is operating
normally.
Giving Priority to the Copy Mode
1
1-19