Output Section - Yamaha MIXING CONSOLE Owner's Manual

70
Chapter 6—Analog I/O & Digital I/O
• GAIN controls
• PEAK & SIGNAL Indicators
• 2TR IN connectors
IN
-10dBV

Output Section

The 01V96 top and rear panels feature output connectors that enable you to connect a mon-
itoring system, master recorder, effects processors and other line-level devices.
• MONITOR OUT connectors L/R
• OMNI OUT connectors 1–4
Tip: Any signal path can be patched to the OMNI OUT connectors. (See page 124 for more
information on patching signals to the OMNI OUT connectors.)
• STEREO OUT connectors L/R
• 2TR OUT connectors
01V96—Owner's Manual
Inputs 1 through 16 feature rotary gain controls that adjust input
sensitivity. Input sensitivity for INPUT connectors 1–12 ranges from
–16 dB to –60 dB when the Pad is off, and from +4 dB to –40 dB
-16 -60
GAIN when the Pad is on. Input sensitivity for INPUT connectors 13–16
ranges from +4 dB to –26 dB.
PEAK
SIGNAL
GAIN
The SIGNAL indicator lights up when the input signal level at
PEAK
INPUTs 1–16 exceeds –34 dB. The PEAK indicator lights up when
SIGNAL
the input signal level is 3 dB below clipping.
These unbalanced RCA phono connectors accept line-level signals
from master recorders.
L
When the AD 15/16 source selector is turned on (pushed in), signals
R
input at these conductors are routed to AD Inputs 15 and 16. When
OUT
the Monitor source selector is turned on (pushed in), you can mon-
2TR
(UNBAL)
itor these signals from the MONITOR OUT connectors.
These balanced TRS-type phone connectors output monitoring sig-
nals or input signals routed from the 2TR IN connectors. The nom-
inal output level is +4 dB.
Use the Monitor source selector in the AD Input section to select the
signal output from these connectors.
These balanced XLR-3-32-type connectors output the Stereo Out
signals. The nominal output level is +4 dB.
These unbalanced RCA phono connectors output line-level signals
to a connected master recorder or other external device. These
L
connectors always output the Stereo Out signals.
R
IN OUT
2TR
-10dBV
(UNBAL)
These balanced TRS-type phone connectors output any
Bus Outs or Input Channel Direct Outs. The nominal out-
put level is +4 dB.