Fader Mode Section - Yamaha MIXING CONSOLE Owner's Manual

ST IN Section
A [ST IN] button
This button selects an ST IN channel pair (ST IN Channels 1 & 2 or 3 & 4) which you can
control using the buttons and controls in the ST IN section. The indicators to the right of
the button indicate the available ST IN channels.
B [SEL] buttons
These buttons select the ST IN channel you want to control.
C [SOLO] buttons
These buttons solo the selected ST IN channels.
D [ON] buttons
These buttons turn the ST IN channels on or off.
E Level controls
These controls adjust the ST IN channel levels.

FADER MODE Section

A [AUX 1]–[AUX 8] buttons
These buttons enable you to select the Aux Send you wish to control. Pressing one of these
buttons switches the Fader mode (see page 33), and displays the corresponding Aux page.
(The selected button's indicator lights up.)
You can now adjust the send level of signals routed from Input Channels to the correspond-
ing Aux buses by using the faders.
B [HOME] button
This button recalls Meter pages that display Input Channel levels or Output Channel (Bus
Out, Aux Out, Stereo Out) levels (see page 34).
1
ST IN
2
SEL SEL
3
SOLO SOLO
4
ON ON
ST IN 1 ST IN 2
5
FADER MODE
1
1 2 3 4
AUX AUX AUX AUX
5 6 7 8
AUX AUX AUX AUX
2
HOME (METER)
17
Control Surface
01V96—Owner's Manual
2