Display Access Section; Scene Button; Patch Button - Yamaha MIXING CONSOLE Owner's Manual

18
Chapter 2—Control Surface & Rear Panel

DISPLAY ACCESS Section

A [SCENE] button
This button displays a Scene page, enabling you to store and recall Scenes (see page 161).
B [DIO/SETUP] button
This button displays a DIO/Setup page, enabling you to set up the 01V96, including digital
input and output setup and remote control setup (see pgaes 72, 188).
C [MIDI] button
This button displays a MIDI page, enabling you to make MIDI settings (see page 215).
D [UTILITY] button
This button displays a Utility page, enabling you to use the internal oscillators and view
information about installed optional cards.
E [ /INSERT/DELAY] button
This button displays a
signal to be inserted, or set the delay parameters (see pages 79, 127).
F [PAN/ROUTING] button
This button displays a Pan/Route page, enabling you to select a Bus to which the selected
channel signal is routed, adjust the selected channel pan settings, adjust the level of signals
routed from Buses 1–8 to the Stereo Bus, and adjust the stereo or surround pan settings (see
pages 85, 135).
G [PAIR/GROUP] button
This button displays a Pair/Grup page, enabling you to create or cancel channel pairs and
group multiple channel faders or [ON] buttons (see pages 93, 147).
H [PATCH] button
This button displays a Patch page, enabling you to patch input signals and Bus Out signals
to Input channels, or patch signals to the desired output connectors (see page 121).
I [DYNAMICS] button
This button displays a Dynamics page, enabling you to control channel gates and compres-
sors (see page 81).
J [EQ] button
This button displays an EQ page, enabling you to set the equalizer and attenuator of the
selected channel (see page 84).
K [EFFECT] button
This button displays an Effect page, enabling you to edit the internal effects processors and
use optional plug-in cards (see page 157).
L [VIEW] button
This button displays a View page, enabling you to view and set mix parameters for a specific
channel (see page 87).
01V96—Owner's Manual
1 2 3 4
DISPLAY ACCESS
6
SCENE SCENE DIO/SETUP DIO/SETUP MIDI MIDI UTILITY UTILITY
5
/ INSERT/ PAN/ PAIR/
PATCH
ROUTING GROUP
DELAY
EQ EFFECT VIEW
DYNAMICS
9 J K L
/INS/DLY page, enabling you to switch the signal phase, set the
7
8