Remote Control; About Remote Function - Yamaha MIXING CONSOLE Owner's Manual

Digital mixing console
Table of Contents

Advertisement

17 Remote Control

This chapter describes the Remote function, which enables you to control external equip-
ment directly from the 01V96 top panel.

About Remote Function

The 01V96's Remote function enables you to control external DAW (Digital Audio Work-
station) equipment, MIDI devices, recorders, etc.
There are two types of Remote functions (Remote and Machine Control):
■ REMOTE (Remote Layer)
To use these types of Remote functions, you must connect the 01V96 to a target device via
USB or an optional MY8-mLAN card installed in the slot, and operate the faders and [ON]
buttons on the top panel to control the external device remotely.
You can specify a target device and parameter values on the DIO/Setup | Remote page. This
layer is enabled when you turn on the LAYER [REMOTE] button. During Remote opera-
tion, the controls on the top panel enable you to control the external device. (You cannot
adjust the 01V96's parameters unless you select a different layer.)
You can assign functions of a target device to the controls on the top panel of the 01V96 by
using Remote layer. The following targets are available for remote control:
• ProTools ........................You can remotely control Digidesign Pro Tools.
• Nuendo..........................You can remotely control Steinberg Nuendo.
• General DAW................You can remotely control DAW software that supports the pro-
• User Defined.................You can also assign MIDI messages to the faders or [ON] but-
• User Assignable Layer.......You can combine the 01V96 channels to create a custom
■ Machine Control
By using MIDI Machine Control commands and the DIO/Setup | Machine page, you can
control an external recording machine that is connected to the 01V96 MIDI port, USB port,
or optional MY8-mLAN card installed in the slot.
Tip: To control external devices from the 01V96, you can also use the User Defined buttons.
Refer to "19 Other Functions" for more information.
tocol used by Pro Tools.
tons to remotely control a connected MIDI device, such as a
synthesizer.
layer. (See page 229 for more information on this function.)
185
Remote Control
01V96—Owner's Manual
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

01v96

Table of Contents