Controlling Parameters By Using Parameter Changes - Yamaha MIXING CONSOLE Owner's Manual

Controlling Parameters by Using Parameter Changes

You can control 01V96 parameters in real time by using Parameter Change messages that
are System Exclusive messages, instead of using MIDI Control Changes.
See "MIDI Data Format" at the end of this Manual for detailed information on available
Parameter Changes.
1 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the
DIO/Setup | MIDI/Host page appears, then specify ports for transmission
and reception of MIDI messages (see page 212).
2 Make connections using the ports selected in Step 1 so that the 01V96 can
transmit and receive MIDI messages to and from the external device.
3 Press the DISPLAY ACCESS [MIDI] button, then press the [F1] button to dis-
play the MIDI | Setup page, then turn off the Tx and Rx ON/OFF buttons in
the PARAMETER CHANGE row.
The 01V96 will now set certain parameter values when it receives corresponding Parameter
Changes. Also, when you adjust certain parameters on the 01V96, it transmits correspond-
ing Parameter Changes.
Note: You do not have to specify MIDI Channels to control parameters using Parameter
Changes. Make sure that both Tx and Rx ON/OFF buttons in the CONTROL CHANGE row
are turned off.
Controlling Parameters by Using Parameter Changes
221
18
01V96—Owner's Manual