Yamaha MIXING CONSOLE Owner's Manual page 237

8 Press the DISPLAY ACCESS [DIO/SETUP]
button repeatedly to display the DIO/Setup
| MIDI/Host page, then set the Cascade Link
parameter to "MIDI."
9 Repeat Step 8 for the master unit.
After Steps 8 and 9, the slave unit will be able to transmit and receive MIDI messages.
10 To match the parameters of both 01V96s,
locate the DIO/Setup | MIDI/Host page on
the copy source unit.
Move the cursor to the TRANSMIT button
for the SYNC parameter, then press
[ENTER].
Data, such as libraries and Scene memories, on the
copy source unit is copied onto the other 01V96 via
the MIDI ports. If you select the REQUEST button
instead of the TRANSMIT button for the SYNC
parameter, you can reverse the copy direction.
At this point, Bus 1–8, Aux 1–4, and the Stereo Bus on both 01V96s are integrated, and the
data is output via Bus Outs 1–8, Aux Outs 1–4, and the Stereo Out on the master unit. If
you solo channels on one of the 01V96s, you can monitor the soloed signals via the Monitor
outputs.
237
Cascading Consoles
01V96—Owner's Manual
19