Yamaha MIXING CONSOLE Owner's Manual page 128

128
Chapter 10—Input & Output Patching
B
INSERT section
• ON/OFF ........................ This button turns the Insert on or off.
• OUT ............................... This parameter enables you to select outputs, ADAT OUT
• IN ................................... This parameter enables you to select inputs, ADAT IN chan-
C
COMP section
• ON/OFF ........................ This button turns the compressor on or off.
• ORDER.......................... This parameter determines the order of Insert patch and com-
3 Move the cursor to the OUT parameter box, then rotate the Parameter wheel
or press the [INC]/[DEC] buttons to select the desired outputs, slot channels,
or internal effects inputs to be patched to Insert Out.
The parameter indicators are explained below:
–
ADAT 1–ADAT 8
SL-01–SL-16
OMNI1–OMNI4
2TD-L/2TD-R
FX1-1/FX1-2
FX2-1/FX2-2
FX3-1/FX3-2
FX4-1/FX4-2
4 Press [ENTER] to confirm the change.
If you move the cursor to another parameter box or display another page before you press
the [ENTER] button, all settings on this page will be cancelled.
5 Move the cursor to the desired IN parameter box, then rotate the Parameter
wheel or press the [INC]/[DEC] buttons to select the inputs, ADAT IN chan-
nels, or slot input channels to be patched to the Insert In.
Refer to the explanation regarding the Input Patch for more information on the parameter
values (see page 122).
6 Press [ENTER] to confirm the change.
Tip: Move the cursor to an empty OUT or IN parameter box and press the [ENTER] button.
The Patch Select window appears. Rotate the Parameter wheel or press the cursor buttons to
select an item to be patched, then press [ENTER]. Move the cursor to the YES button, then
press [ENTER]. The selected item is now patched.
7 To enable the specified Insert patch, move the cursor to the ON/OFF button
in the INSERT section, and press [ENTER] to turn it on or off.
01V96—Owner's Manual
channels, slot output channels, or internal effects inputs as the
Insert Out destination.
nels, slot input channels, or internal effects outputs as the Insert
In source.
pressor when they are inserted at the same signal path point.
With the "COMP → INS" setting, signals pass through the
compressor first, then the Insert. With the "INS → COMP" set-
ting, signals pass through the Insert first, then the compressor.
Parameter values
No assignment
ADAT OUT Output Channels 1–8
Slot Channels 1–16
OMNI OUT connectors 1–4
2TR OUT DIGITAL (L/R)
Inputs 1 & 2 of Internal Effects Processor 1
Inputs 1 & 2 of Internal Effects Processor 2
Inputs 1 & 2 of Internal Effects Processor 3
Inputs 1 & 2 of Internal Effects Processor 4
Description