Initializing The 01V96 - Yamaha MIXING CONSOLE Owner's Manual

Initializing the 01V96

You can delete all currently-recorded settings and restore the factory-preset values, and reset
the Operation Lock password to its initial setting. Follow the steps below.
Note:
• If you initialize the 01V96 to the factory-preset values, all Scene, library and other data you
stored previously will be erased. Proceed with caution.
• If you want to keep the current internal data, be sure to first back up the data using the
included Studio Manager software.
Tip:
• You can also store the data to an external MIDI device, such as a MIDI data filer, by using
MIDI Bulk Dump (see page 222).
1 Make sure that the power to the 01V96 is turned off.
2 While holding down the SCENE MEMORY [STORE] button, turn on the
POWER ON/OFF switch.
After a moment, the 01V96 displays the following confirmation window.
3 To reset the 01V96 to factory default settings, move the cursor to the INI-
TIALIZE button, then press [ENTER].
To cancel the initialization operation, move the cursor to the CANCEL button, then press
[ENTER].
When the internal data is thoroughly overwritten, the 01V96 restarts using the factory set-
tings.
4 To reset the Operation Lock password to its initial setting, in Step 2, move
the cursor to the PASSWORD button, then press [ENTER].
The password is reset to "1234".
If you do not take any action after the confirmation window appears, the window automat-
ically closes and the 01V96 restarts without being initialized.
Initializing the 01V96
01V96—Owner's Manual
239
19