Track Recording; Creating A New Song - Yamaha AW2400 Owner's Manual

This chapter explains how to record the audio signal from an instrument or
microphone connected to the AW2400 to the tracks of a song.
Before you can begin recording on the AW2400 you need to create a new song.
HINT
• When you start up the AW2400 for the first time, an empty song will be loaded automatically.
If you use this automatically-loaded song, the procedure described here is not necessary.
1
Call the SONG screen Song List page by
either pressing the Work Navigate section
[SONG] key as many times as necessary, or
by pressing the [F1] key after pressing the
[SONG] key.
The currently selected song in the Song List will be
highlighted (inverted).
2
Move the cursor to the NEW button and
press the [ENTER] key.
A popup window will ask you whether you want to
save the current song.
Chapter 6

Track recording

Creating a new song

3
NEW button
Move the cursor to YES (to save the current
song) or NO (if you don't want to save the
current song) and press the [ENTER] key.
A popup window containing the various settings for
the new song will appear.
The following settings can be made via this popup
window.
• Fs ............................... The sample rate of the new
song can be set to either
44.1 kHz or 48 kHz.
• Recbit ........................ The bit depth of the new
song can be set to either 16
or 24 bits.
• Sound Clip Time ....... The sound clip record time
can be set to between 30–
180 seconds.
NOTE
• Songs recorded with a sampling frequency of 48 kHz cannot
be written to an audio CD.
AW2400 Owner's Manual
6
47