Effects Parameters - Yamaha AW2400 Owner's Manual

■ REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
One input, two output hall, room, stage, and plate reverb simulations, all with gates.
Parameter Range
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
HI. RATIO 0.1–1.0
LO. RATIO 0.1–2.4
DIFF. 0–10
DENSITY 0–100%
E/R DLY 0.0–100.0 ms
E/R BAL. 0–100%
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
GATE LVL OFF, -60 to 0 dB
ATTACK 0–120 ms
*1
HOLD
*2
DECAY
*1. 0.02 ms–2.13 s (fs=44.1 kHz), 0.02 ms–1.96 s (fs=48 kHz)
*2. 6 ms–46.0 s (fs=44.1 kHz), 5 ms–42.3 s (fs=48 kHz)
■ EARLY REF.
One input, two output early reflections.
Parameter Range
S-Hall, L-Hall, Random,
TYPE
Revers, Plate, Spring
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI. DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
FB.GAIN -99 to +99%
HI. RATIO 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
■ GATE REVERB, REVERSE GATE
One input, two output early reflections with gate, and early reflections with reverse gate.
Parameter Range
TYPE Type-A, Type-B
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI. DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
HI. RATIO 0.1–1.0
ER NUM. 1–19
FB.GAIN -99 to +99%
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU

Effects Parameters

Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Low-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
Delay between early reflections and reverb
Balance of early reflections and reverb (0% = all reverb, 100% = all early reflections)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Level at which gate kicks in
Gate opening speed
Gate open time
Gate closing speed
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reflection diffusion (left–right reflection spread)
Reflection density
Number of early reflections
Feedback gain
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 = live)
Initial delay before reverb begins
Reflection diffusion (left–right reflection spread)
Reflection density
High-frequency feedback ratio
Number of early reflections
Feedback gain
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Effects Parameters
Description
Description
Description
AW2400 Owner's Manual
245