Eq/Dynamics Processor Library Operation; Accessing The Eq/Dynamics Library Screens - Yamaha AW2400 Owner's Manual

EQ/Dynamics Processor Library Operation

The AW2400 includes "setup libraries" that contain preset EQ, gate, and compressor settings
that can be recalled and used in a variety of situations. The libraries can also be used to store
your own settings for easy recall as needed.
HINT
• If necessary library recall can be automated using the AW2400's Automix record/playback
capabilities ( → p. 181).
Accessing the EQ/Dynamics
Library screens
This section describes the procedure for accessing the EQ/
Dynamics Library screens and recalling library presets.
■ Recalling EQ Library settings
From this library you can recall EQ settings to the cur-
rently selected channel. Of library numbers 001–128,
numbers 001–040 are read-only, and 041–128 can be used
to store your own settings.
EQ library operations are performed via the PAN/EQ
screen EQ Lib. page.
1
Use the Layer section, [INPUT SEL], [SEL],
and [STEREO SEL] keys to select the target
channel.
2
Press the Selected Channel section [PAN/
EQ] key so that its indicator lights, then
press Selected Channel knob 2, 3, or 4.
The PAN/EQ screen will appear.
3
Press the Display section [F2] key, or press
the [PAN/EQ] key as many times as neces-
16
sary until the EQ Lib. page appears.
C D A
154
AW2400 Owner's Manual
EQ/Dynamics Processor Library Operation
B
The EQ Lib. page includes the following items.
1 Current Response Curve
A graphic representation of the current EQ curve for
the currently selected channel.
B Output Meter
Displays the signal level after the EQ stage.
C EQ Curve
A graphic representation of the EQ curve of the cur-
rently selected EQ setting in the library list.
D List
A list of all the settings stored in the library. The row
highlighted by a dotted frame is the setting currently
selected for operation. An
library settings.
NOTE
• When a TYPE
that only allows TYPE
channels, and AUX channels), the EQ preset will be recalled
as TYPE I EQ.
E Buttons
These buttons execute the RENAME, RECALL,
STORE, and CLEAR functions. Detailed description
of their operation begins on page 156.
■ Recalling Gate Library settings
E
From this library you can recall gate settings to the cur-
rently selected input channel. Of library numbers 001–
128, numbers 001–004 are read-only, and 005–128 can be
used to store your own settings.
Gate library operations are performed via the DYNAM-
ICS screen Gate Lib. page.
1
Use the Layer section, [INPUT SEL] and
[SEL] keys to select the target channel.
2
Press the Selected Channel section [DYN]
key so that its indicator lights, then press
Selected Channel knob 1, 2, 3, or 4.
The DYNAMICS screen will appear.
icon indicates read-only
II
EQ library preset is recalled to a channel
I
EQ (the input channels, effect return