Operation of the AW2400 Automix features is described below.
Automix allows operations such as fader moves and [ON] switch state changes to be recorded
and played back in real time. For example, you can record complex mixdown/bounce operations
using Automix so that they can be precisely reproduced as many times as necessary.
The parameters that can be recorded by Automix are as follows.
• Fader operation for each channel
• [ON] key operation for each channel
• Pan operation for each channel
When recording to Automix you can break complex oper-
ations down and record them channel by channel or
parameter by parameter in several takes, and even "punch
in/out" so you can record just a specified region of a song.
Furthermore, the recorded Automix data can be displayed
in a list and edited for precise control.
Automix operation is carried out from the AUTOMIX screen Automix page.
To call this page press the SCENE/AUTOMIX/USB sec-
tion [AUTOMIX] key as many times as necessary, or
press the [F1] key after pressing the [AUTOMIX] key.
This page contains the following items.
A
B
D
Chapter 19
Automix
About Automix
• EQ operation for each channel
• AUX and effect send operation for each channel
• Scene and library recall operations
Up to 16 Automix sequences can be recorded in a dedi-
cated library and recalled whenever needed. The current
Automix data as well as the Library contents are saved
independently with each AW2400 song.
Automix Operation
1 MODE field
Turns Automix on or off, as well as switching between the
record and playback modes.
• ENABLE/DISABLE button
C
• STOP button....... Stops Automix recording or playback
• PLAY button ....... While the recorder section is running
................... Enables or disables Automix.
(does not affect recorder operation).
Appears inverted when Automix is
stopped.
and Automix recording/playback is
stopped, pressing this button after
pressing the REC button engages
the Automix record standby mode.
Appears inverted during Automix
recording and playback.
AW2400 Owner's Manual
19
181