Recalling Effect Library Settings - Yamaha AW2400 Owner's Manual

Recalling Effect Library settings

The first step in using an effect is to recall a preset from the effect library that uses the required
effect.
HINT
• The effect type for a recalled effect library preset cannot be changed. For this reason even
when you want to program an effect from scratch it is necessary to begin by recalling an
effect library preset that includes the effect type you want to use.
1
Press the Selected Channel section
[EFFECT] key so that its indicator lights.
The EFFECT screen will appear.
2
Press Selected Channel knob 1–4, corre-
sponding to the effect processor to which
you want to load the effect.
While the EFFECT screen is showing Selected Chan-
nel knobs correspond to effect processors 1–4. So, for
example, the EFFECT1 screen will be selected if you
press Selected Channel knob 1.
HINT
• If the AUTO DISPLAY function is set to OFF ( → p. 211), the
EFFECT screen will not appear automatically when step 1,
above, is performed. In this case press one of the Selected
Channel knobs (1–4) will cause the corresponding EFFECT
screen to appear.
3
Press the Display section [F4] key to call
the FX Lib. Page.
You can select the effect library preset to be loaded
14
into the effect processor selected in step 2 via this
page.
HINT
• Library numbers 1–43 contain pre-programmed read-only
effect presets.
• Refer to "Effect Library Operations" on page 122 for details on
the effect library RENAME, STORE, and CLEAR functions.
116
AW2400 Owner's Manual
Recalling Effect Library settings
List RECALL button
4
Move the cursor to the List, and use the
[DATA/JOG] dial or [INC]/[DEC] keys to
select the library setting to be recalled.
The setting highlighted by a dotted frame is currently
selected for recall.
5
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window confirming the recall operation will
appear.
HINT
• Pressing the [F1] key while holding the Display section
[SHIFT] key has the same effect as the RECALL button.
6
To actually recall the selected setting move
the cursor to the OK button and press the
[ENTER] key.
The library setting will be recalled.