Erasing Cd-Rw Media - Yamaha AW2400 Owner's Manual

Here's how to erase all data that has been written to CD-RW media so that the CD-RW disc can
be used to record new data. You will need to perform this operation on a disc that has been used
to store data from a computer or other equipment if you want to use that disc with the AW2400.
HINT
• Since data is erased as necessary when you back up AW2400 data to CD-RW media or
when you write audio data to CD-RW media, you do not need to perform the following
procedure each time you re-use the disc.
NOTE
• The erased data cannot be recovered. Perform this operation with care.
1
Call the CD screen Setting page by either
pressing the Work Navigate section [CD]
key as many times as necessary, or by
pressing the [F3] key after pressing the
[CD] key.
2
Move the cursor to the CD-RW MEDIA
ERASE field, and press the [ENTER] key to
select the desired erasure method.
The buttons select the following erasure methods.
• SIMPLY button ...........Only the TOC (Table Of Con-
• PERFECTLY button ...All data written to the CD-
Move the cursor to the appropriate button and press
the [ENTER] key. A popup window will ask you to
confirm the erasure.

Erasing CD-RW media

tents) data written to the CD-
RW disc will be erased. This
is the quickest way to erase
a CD-RW disc.
RW disc will be erased com-
pletely. This method erases
all data from the media and
thus will take longer than the
SIMPLY option.
● If you turn on the SIMPLY button
● If you turn on the PERFECTLY button
HINT
• Pressing the [F1]–[F2] keys while holding the Display section
[SHIFT] key has the same effect as the SIMPLY ([F1] key) and
PERFECTLY ([F2] key) buttons, respectively.
3
To execute the erasure move the cursor to
the OK button. If you decide not to erase
the disc move the cursor to the CANCEL
button. Then press the [ENTER] key.
Erasure will begin if you selected the OK button. (This
operation cannot be halted.)
AW2400 Owner's Manual
Erasing CD-RW media
22
221