Yamaha AW2400 Owner's Manual page 225

2
Select a wordclock source via the WORDCLOCK SOURCE field.
The wordclock source setting will depend on how the AW2400 is being used. Here are a few
examples.
● AW2400 As Wordclock Master
When the AW2400 is used on its own, or when it is used as the wordclock master for an external
HDR, DAW, or similar digital audio device, turn the INT button on. The external device(s) must
be set to synchronize to the master wordclock from the AW2400.
AW2400
(Wordclock master)
WORDCLOCK SOURCE=INT
● Using an HDR or DAW As Wordclock Master
Set the HDR or DAW to use it's internal clock in order to function as wordclock master so that
the AW2400 can synchronize to the digital signal received at a digital input on an I/O card. Select
the 1/2–15/16 button corresponding to the digital input at which the master signal is being
received.
AW2400
(Wordclock slave)
WORDCLOCK SOURCE=1/2–15/16
● Using an MD or DAT Recorder as Wordclock Master
Connect the digital audio output of the MD or DAT recorder to the AW2400 [DIGITAL STEREO
IN] connector, and turn the D.ST IN button on so that the AW2400 can synchronize to the
received digital signal.
AW2400
(Wordclock slave)
WORDCLOCK SOURCE=D.ST IN
3
Move the cursor to the appropriate button and press the [ENTER] key.
The AW2400 clock source will change accordingly, and the sampling frequency of the selected
clock source will appear in the Fs field.
[DIGITAL STEREO OUT]
connector
[DIGITAL STEREO IN]
connector
or
I/O slot
Digital I/O card
I/O slot
Digital I/O card
[DIGITAL STEREO OUT]
connector
[DIGITAL STEREO IN]
connector
Wordclock and Cascade Settings
Wordclock
Wordclock
HDR
(Wordclock slave)
Wordclock
HDR
(Wordclock master)
Wordclock
DAT recorder, etc.
(Wordclock master)
AW2400 Owner's Manual
23
225