Changing Channel Library Names; Storing Channel Library Settings - Yamaha AW2400 Owner's Manual

Yamaha professional audio workstation owner's manual
Hide thumbs Also See for AW2400:
Table of Contents

Advertisement

Changing Channel Library Names

Here's how you can change the names of the settings in
the libraries.
1
Call the CH VIEW screen Library page by
either pressing the [VIEW] key as many
times as necessary, or by pressing the [F2]
key after pressing the [VIEW] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library setting to be
edited.
The setting highlighted by a dotted frame is currently
selected for editing.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
HINT
• Pressing the [F4] key while holding the Display section
[SHIFT] key has the same effect as the RENAME button.
4
Enter a name for the selected library set-
ting, move the cursor to the OK button, and
press the [ENTER] key (refer to page 32 for
details on name entry).
This confirms and enters the new name.

Storing Channel Library settings

The procedure for storing library settings is as follows.
NOTE
• New settings cannot be stored to read-only library settings (those
marked with an
icon).
• If you select and store to a library number that contains previously-
stored data, the previous data will be overwritten.
1
Call the CH VIEW screen Library page by
either pressing the [VIEW] key as many
times as necessary, or by pressing the [F2]
key after pressing the [VIEW] key.
2
Use the [DATA/JOG] dial or [INC]/[DEC]
keys to select the library number to which
the settings are to be stored.
The setting highlighted by a dotted frame is currently
selected for storage.
3
Move the cursor to the STORE button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
HINT
• Pressing the [F2] key while holding the Display section
[SHIFT] key has the same effect as the STORE button.
4
As required, enter a name for the selected
library setting, move the cursor to the OK
button, and press the [ENTER] key (refer to
page 32 for details on name entry).
The library setting will be stored.
AW2400 Owner's Manual
Channel Library Operation
109
12

Advertisement

Table of Contents
loading

Table of Contents