Recording To A Specified Track; Clearing A User Song - Yamaha EZ-300 Owner's Manual

Recording Your Performance

Recording to a Specified Track

1
Make the desired settings, such as those
of Voice or Style.
If you want to record the melody performance,
turn ACMP off (page 45). If you want to record
Style playback, turn ACMP on (page 45).
2
While holding down the [REC] button,
press the desired Track button 1 or 2 to
engage the Record mode.
If you want to record Style playback, make sure to
select the Track 2. If you want to record melody
performance, select either Track 1 or Track 2 as
desired. The illustration below is the example
when selecting Track 2.
The User Song appears on the display.
User 1
EC
Flashing: Track is selected as a recording target.
Lit: Track contains data.
Unlit: Track contains no data or is muted.
You can record your performance while playing
back or muting the recorded track. To play back
or mute the track, press the [REC TRACK 1] or
[REC TRACK 2] button. Each time the corre-
sponding button is pressed, playback/mute is
switched.
3
Press the [+/YES], [-/NO] buttons to
select the User Song you want to record.
4
Same as in Steps 3 to 5 (page 51) in
"Quick Recording."
When playing back the recorded Song, pressing
[REC TRACK 1] or [REC TRACK 2] button allows
you to mute Track 1 or Track 2. Each time the button
is pressed, playback/mute is switched.
52
EZ-300 Owner's Manual
User Song
001

Clearing a User Song

1
Press the [SONG] button then select the
desired User Song by using the Number
buttons.
2
Press and hold the [REC] button for lon-
ger than a second.
A confirmation message appears.
YES
ClrUser1
Hold for longer
than a second.
To cancel the operation, press the [-/NO] button.
3
Press the [+/YES] button.
A confirmation message appears again.
YES Sure?
To cancel the operation, press the [-/NO] button.
4
Press the [+/YES] button to clear the
Song.
A "Writing!" message appears while the Song is
being cleared.