Applying Effects To The Sound - Yamaha PSR-I300 Owner's Manual

Applying Effects to the Sound

This instrument can apply various Effects to the
instrument's sound (as described below).
 DSP
This effect applies digital signal processing to the
Main Voice and Song part when a Voice or Song that
includes the DSP setting is selected. The DSP effect
can be turned on/off, and also features various Types
(page 88) which can be selected via the following
procedure.
1
Press the [DSP] button to turn on the DSP.
NOTE
• Among the Voices in the keyboard performance, the
DSP effect is applied only to the Main Voice.
• The DSP cannot be turned on during lessons.
Although the DSP type (page 88) is automatically
determined according to the current Main Voice,
you can select another type.
001
Appears when
the DSP is on.
2
Hold down the [DSP] button for a while until the
DSP-related indication appears.
Hold for longer
than a second.
29
3
Use the number buttons [0]–[9], or [+/YES] and
[-/NO] buttons to select the desired type.
4
Play the keyboard.
5
Press the [DSP] button again to turn off the DSP.
Harmnum1
DSPType
025
Tremolo
025
Current DSP type
Playing a Variety of Instrument Voices
 Articulation
This effect reproduces the sounds of playing meth-
ods that are unique to specific instruments. To enjoy
this effect, select one of the S.Art Lite Voices, indi-
cated by "***" in the Voice List (page 70), and then
play the keyboard while holding down the [ARTICU-
LATION] button.
Examples of the Articulation effect
If you select the following voices, you can realistically
reproduce the specific playing techniques below.
Example 1: Voice number 005 "S.Art Lite Sarangi"
When you play the keyboard while holding down the
[ARTICULATION] button, the attack part sounds with
the pitch bending up.
Example 2: Voice number 012 "S.Art Lite Santoor"
When you press the [ARTICULATION] button, trem-
olo sound is produced.
Appears when the
S.Art Lite Voice is selected
Sarangi
005
For Voices other than S.Art Lite Voices
Modulation or Portamento effects are suitably
assigned according to the characteristics of each
Voice. To use the Modulation effect, follow the same
manner as with Articulation. To use the Portamento
effect, follow the instructions below instead. For
details on Portamento, refer to page 20.
1
To enable the Portamento effect, press the
[ARTICULATION] button before you start playing
the keyboard.
2
To disable the Portamento effect, press the
[ARTICULATION] button again.
PSR-I300 Owner's Manual
19