Digital Reverb Effects - Yamaha Clavinova CVP-55 Owner's Manual

Split Mode
Split Balance
The volume balance between the left-hand and right-hand
voices can be adjusted by using the TEMPO [A] and [V]
buttons while holding the [SPLIT] button. The selected
balance value (1 ... 15) will be shown on the TEMPO dis-
play while the TEMPO [A] and [V] buttons are held.
Di 8-4 28]
* A setting of "1" sets the volume of the left voice to maxi-
mum and the right voice to minimum.
* A setting of "8" sets both voices to the same volume
(this is the default balance setting, and can be recalled
at any time by pressing the TEMPO [A] and [V] buttons
simultaneously).
* A setting of "15" sets the volume of the right voice to
maximum and the left voice to minimum.
Damper Pedal Operation in the Split
Mode
The CVP-55/CVP-65 damper pedal (the right pedal —
see "The Pedals" below) can be assigned to the left voice
only, the right voice only, or to both voices in the split
mode.
* Right Voice Only (default); Press the damper pedal
while holding the [SPLIT] button.
* Left Voice Only: Press the left (soft) pedal while holding
the [SPLIT] button.
e Both Voices: Press both the damper and left pedals
while holding the [SPLIT] button.
NOTE: The dual and split modes cannot be used at the same time.
NOTE: In the split the soft and sostenuto pedal functions apply to
both the left- and right-hand voices.
NOTE: When the Piano ABC Single Finger mode (page 21) and
the split mode are used simultaneously, the left-hand voice
will be accompanied by the appropriate ABC chord voices.
16
Digital Reverb Effects
The [REVERB] button provides a number of digital ef-
fects that you can use for extra depth and expressive power.
Each time the [REVERB] button is pressed the next effect
on the reverb "list" is selected and the corresponding indica-
tor will light. No effect is selected when no indicator is lit.
O ROOM
OHALL 1
ona 2
© COSMIC
O
OFF (No indicator lit)
No effect is produced.
ROOM
This setting adds a reverb effect to the sound that is simi-
lar to the type of acoustic reverberation you would hear
in a medium-size room.
HALL 1
For a more spacious reverb sound, use the HALL 1 set-
ting. This effect simulates the natural reverberation of a
medium-size concert hall.
HALL 2
HALL 2 simulates the reverb of a very large concert hall.
COSMIC
*COSMIC" is an echo effect in which the sound seems to
"bounce" around in the stereo sound field.
* The ROOM effect is automatically selected when the POWER
switch is turned on.
Reverb Depth Control
The depth of the selected reverb effect can be increased
or decreased by pressing the TEMPO [A] ог [V] button
while holding the [REVERB] button. The reverb depth is
shown on the TEMPO display while the [REVERB] and
[A] or [V] buttons are held. The reverb depth range is from
'*0" (no effect) to "15" (maximum depth).
+ Reverb depth is initially set to "B" when the power is turned
on (this setting can be recalled at any time by pressing the
TEMPO [A] and [¥] buttons simultaneously).
—
un
|
* To preserve overall balance and sound quality, relatively
shallow reverb is applied to the bass and rhythm sound.