Fixing the output image selection (lock function)
1
2
3
Continuously Capturing Still Images (Record)
Continuously freezing input images and writing to memory
1
2
3
4
5
456
Still Image Operations
In the Frame Memory menu, select VF3 'Reposition/Lock' and HF2
'Lock.'
The Lock menu appears.
In the frame memory selection area, select the FM output. (See page 444.)
Press [Lock], turning it on.
This fixes the currently selected frame memory output image.
To release the lock, set [Lock] to off.
In the Frame Memory menu, select VF1 'Still' and HF4 'Animation
Record.'
The Animation Record menu appears.
Select the desired frame memory.
For details of the operating procedures, see "Selecting outputs (FM) and
target frame memory" (page 443).
To use V/K mode, press [V/K Mode], turning it on.
Press a button in the frame memory folder selection area, to select the
folder to hold the freeze image.
For details of the selection method, see page 444.
Note
The folder selected here is the destination folder for writing the freeze
image.
It is not possible to change the selection of this folder after the following
step 5.
An orange bar appears on the selection button for the destination folder.
Press [Record Enable], turning it on.