Regions And Registers; Regions - Sony MVS-8000 User Manual

Regions and Registers

Regions

The term "region" refers to some sort of functional block of the system.
When saving or recalling snapshot registers and effect registers, or creating or
editing effects, you first select the region to which the operation applies. You
can also select multiple regions simultaneously.
Classification of the regions
The regions are classified as follows.
• Master region
• The following 29 regions
Only the regions assigned to the region selection buttons of the numeric keypad
control block can be used simultaneously.
For details of the region assignment to the region selection buttons, see
"Overall Control Panel Settings (Config Menu)" in Chapter 16 (Volume 2).
Regions applicable to keyframe operations
All the above regions.
Regions applicable to snapshot operations
Fourteen regions, that is, the above 14 regions less all of the external device

regions.

"User" regions
You can optionally assign the following regions to the regions User1 to User8.
The User regions shown in parenthesis are the default assignments.
• Color backgrounds 1 and 2 (User1)
• AUX1 to AUX48 (User2)
• Monitor 1 to 8 (User3)
• Frame Memory 1 to 8 (User4)
• Color correctors 1 and 2
For details of the User1 to User8 region assignment, see "Overall Control
Panel Settings (Config Menu)" in Chapter 16 (Volume 2).
160

Regions and Registers

– Switcher: M/E1, PGM/PST, User1 to User8
– DME: DME ch1 to DME ch4 (inclusive of Global)
– External devices: P-Bus, Device 1 to Device 12, GPI, Macro