Executing A Transition - Sony MVS-8000 User Manual

When, with a key inserted, a key is selected in the next transition
Key
Wipe
A wipe replaces the current video by the new video according to a
predetermined pattern. This transition type can also be selected for an
independent key transition.
For details, see "Wipes" (page 56) and Chapter 5 "Wipes" (page 389).
DME wipe
Using a DME effect, it is possible to obtain a transition to a new image from
the current image, as in a wipe. You can also use this transition type as an
independent key transition.
For details, see "DME Wipes" (page 68) and Chapter 6 "DME Wipes" (page
413).
Clip transitions
Linked to a mix (dissolve) or wipe transition, a frame memory clip (movie) is
played back.
Note
The clip transition function is only supported on the MVS-8000A/8000G.
Cut
A cut switches instantaneously from the current video to the new video. When
the next transition is a key transition, the key cuts in or out instantaneously.

Executing a Transition

There are two modes of executing a transition: an auto transition by button
operation or a manual transition using the fader lever.
40
Transitions
Key state preserved
Preset color mix (when set to preserve key state)
Key gradually
removed