Sony MVS-8000 User Manual page 409

2
3
4
To set the wipe position by a menu operation
1
2
To move the pattern from its current position to the center through
the course of a transition
Press [Auto Center] in the <Position> group, turning it on.
408
Wipe Settings for Independent Key Transitions
The buttons in the device control block are assigned to the wipe position
setting as follows.
Table 1: Buttons and assigned settings
Button name Setting
K1 CB1 Wipe position for independent key 1 transition
K2 CB2 Wipe position for independent key 2 transition
K3 FM1 Wipe position for independent key 3 transition
K4 FM2 Wipe position for independent key 4 transition
Table 2: Buttons assigned to functions
Button name Function
POS Toggle Position on or off.
X, Y Fix the operating direction.
CTR Return the pattern position to the center of the screen.
Press one of the buttons in Table 1 above, to select the wipe position to
which the operation applies. Multiple selection is possible.
Press the [POS] button, turning Position on.
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
Press [Position] in the Key1 Wipe Adjust menu, turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Position H Horizontal position
2 Position V Vertical position
a) See page 61.
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00