Sony MVS-8000 User Manual page 379

4
Note
If mosaic or defocus is enabled, and in the <Mosaic/Defocus Mode> group you
select Video/Key, then the crop is disabled.
Applying a border to a key for which resizer is on
1
2
3
4
378
Resizer
Set the parameters.
These settings are the same as those for crop of DME. For details, see
"Crop Settings" in Chapter 11 (Volume 2).
In the M/E-1 >Key1 >Processed Key menu, press [Resizer], turning it on.
This enables the resizer function.
Press [Border/Crop].
The Border/Crop menu appears.
Press [Boreder], turning it on.
This enables the adjustment of crop.
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• SD format
Knob Parameter Adjustment Setting
1 H Simultaneously adjust width of left
and right borders
2 V Simultaneously adjust width of top
and bottom borders
3 All Simultaneously adjust width of all
four borders
5 Density Density of the borders
• HD format
Knob Parameter Adjustment Setting
1 H Simultaneously adjust width of left
and right borders
2 V Simultaneously adjust width of top
and bottom borders
Values
0.00 to 4.00
0.00 to 3.00 (4:3)
0.00 to 2.25 (16:9)
Value of H shown
0.00 to 100.00
Values
0.00 to 12.00 (4:3)
0.00 to 16.00 (16:9)
0.00 to 9.00