Sony MVS-8000 User Manual page 384

Knob
3
Applying a mosaic
1
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press
[Mosaic], turning it on.
2
Set the parameters.
This operation is the same as the DME mosaic setting. For more details,
see "Mosaic Settings" in Chapter 11 (Volume 2).
3
In the < Mosaic/Defocus Mode > group, select the signal to which to apply
the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
Note
If mosaic is enabled, and in the <Mosaic/Defocus Mode> group you select
Video/Key, then the crop and mask are disabled.
4
Set the parameters.
Knob
1
2
3
To make the mosaic like a relief pattern
1
With [Mosaic] on, press [Relief], turning it on.
2
In addition to the mosaic parameters, set the following parameters.
Knob
3
4
Parameter Adjustment
All Both horizontal and vertical
adjustment
Parameter Adjustment
H Horizontal defocusing
V Vertical defocusing
All Horizontal and vertical defocusing H value shown
Parameter Adjustment
Gain Relief depth of mosaic cells
Angle Light source direction
Setting values
H value is displayed
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
–8.00 to +8.00
383
Resizer