Pattern Mix - Sony MVS-8000 User Manual

Pattern Mix

Combining two patterns
You can combine two selected patterns (referred to as main and "sub") to form
a new pattern. Select a main pattern in the Main Pattern menu, then use the
following procedure.
1
2
392
Basic Procedure for Wipe Settings
Knob Parameter Adjustment
1 H Size Particle width
2 V Size Particle height
3 Flash Rate Rate of generation of particles
Note
When Flash Rate is set to 0.00, you cannot change the pattern. In this state,
adjusting H Size or V Size has no effect on the pattern.
For details of a pattern mix, see the next section.
For details of applying pattern modifiers, see "Setting Wipe Modifiers"
(page 394).
In the M/E-1 >Wipe menu, select HF3 'Sub Pattern.'
The Sub Pattern menu appears.
In the same way as for the main pattern, select the sub pattern.
The patterns that can be selected for the sub pattern depend on the pattern
selected for the main pattern (see the following table).
Possible combinations of main pattern and sub pattern
Yes: Combination possible
Main Sub pattern
pattern
Standard
Standard Yes
Enhanced Yes
Rotary No
Mosaic Yes
No: Combination not possible
Enhanced Rotary
Yes No
Yes No
No No
Yes No
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Mosaic Random/
diamond
dust
Yes Yes
Yes Yes
No No
No Yes