Sony MVS-8000 User Manual page 401

To set the wipe position using the trackball
You can also set the wipe position using the trackball in the device control
block.
1
2
3
4
Rotating the wipe pattern (Rotation)
You can apply rotation independently to the main pattern and sub pattern.
1
2
400
Basic Procedure for Wipe Settings
In the device control block, press the [M/E1] or [P/P] button, turning it on.
The buttons in the device control block are assigned to the wipe position
setting as follows.
Table 1: Buttons and assigned settings
Button name Setting
MAIN Wipe position for common transition (main pattern)
SUB Wipe position for common transition (sub pattern)
Table 2: Buttons assigned to functions
Button name Function
POS Toggle Position on or off.
X, Y Fix the operating direction.
CTR Return the pattern position to the center of the screen.
Press the [MAIN] button or [SUB] button, turning it on.
Press the [POS] button, turning Position on.
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
In the <Rotation> group, select the rotation type.
Angle: Incline the pattern through a fixed angle.
Speed: Rotate at a fixed rate.
Magnitude: Rotate through a particular angle during the course of the
transition.
For an overview of the rotation, see page 61.