Out Of Warranty Service - Xantrex Powerpack 300 Owner's Manual

Warranty and Return

Out of Warranty Service

If the warranty period for your XPower Powerpack 300 has expired, if the unit was
damaged by misuse or incorrect installation, if other conditions of the warranty have not
been met, or if no dated proof of purchase is available, your unit may be serviced or
replaced for a flat fee.
To return your XPower Powerpack 300 for out-of-warranty service, contact Xantrex
Customer Service for a Return Material Authorization (RMA) number and follow the
other steps outlined in
Payment options such as credit card or money order will be explained by the Customer
Service Representative. In cases where the minimum flat fee does not apply, as with
incomplete units or units with excessive damage, an additional fee will be charged. If
applicable, you will be contacted by Customer Service once your unit has been received.
Information About Your System
As soon as you open your XPower Powerpack 300 package, record the following
information and be sure to keep your proof of purchase.
p
Product Number
p
Serial Number
p
Purchased From
p
Purchase Date
If you need to contact Customer Service, please record the following details before
calling. This information will help our representatives give you better service.
p
Warning, Error or Panel
Fault Message
p
Appliances operating when
problem occurred
p
Description of problem
______________________________________________________________
______________________________________________________________
48
"Return Procedure" on page 47.
852-0301
_______________________________
_______________________________
_______________________________
_________________________________
_________________________________
_________________________________